Menu
DIN Rail mountable (plastic DIN rail included)
6x Protected general purpose IO Ports which can either be used as inputs or open drain outputs.
Analog sensor port for use with either 4-20mA or 0-14V sensors.
2 high current relays allow for control of AC loads or high current DC loads.
2 tamper switches.
RGB status indication light.
Olarm One-Wire Serial comms bus interface to supported Olarm communicators allowing for up to 8 Olarm LINK to be connected to one communicator.
Paradox
MG5050
MG5050+
SP6000
SP6000+
SP65
EVO192
Texecom
Premier 412
Premier 816
Premier 816 PLUS
Elite 24
Elite 48
Elite 64
Elite 88
Elite 168
IDS
806
X16
X64
X64 Serial
Please Note: Olarm LINK is not compatible with DSC Power Series and IDS 805 alarm panels.
Packaged weight
107 g
Cable weight
40g
Device dimensions
87 mm length 70 mm width 37 mm height
Enclosure material
ABS – Resin MG47F
Mounting
DIN Rail (plastic DIN rail included)
Input voltage
7 to 24 VDC
Current consumption
25mA (typical), 250mA (max) at 12 VDC
Temperature
–40 to 60°C
Humidity
0 – 90% RH
Via an Olarm PRO, Olarm PRO 4G or Olarm MAX communicator.
Protocol
Olarm One-Wire Serial
Max cable length
8 meter
LINK8S
6 GPIO, 2 relays, 1 analog sensor
LINK8
6 GPIO, 2 relays
Number of ports
6
Voltage tolerance
0-20 VDC
Max open drain current
120 mA
Number of ports
1 configurable to voltage or current
Voltage sensor
0-15 VDC
Current sensor
4-20 mA
In app status view of the LED status on supported peripherals
Number of ports
1 Connect the Voltage sensor port to the status LED
Supported peripherals
Centurion D5 Evo Centurion D5 Smart Centurion D10 Smart ET Nice Drive 500
Please log a support request should your device not be listed. The team will investigate whether or not support for your device can be configured.
Number of relays
2
Contacts per relay
1x Normally Open (NO) 1x Normally Closed (NC)
Max voltage
240 VAC / 28 VDC
Max current
10 A
Auto-detection when connected to an Olarm communicator. Follow the instructions in the Olarm APP once connected and LED is blue.
Contact ID on certain events
1x Olarm LINK
1x 1.5m communications cable
1x Plastic DIN rail
1x DIN rail clip
2x screws & 2x wall plugs
EN 62368-1:2014+A11: (2017)
IEC 62368-1: (2014)
ETSI EN 301 489-1: V2.2.3 (2019-11)
ETSI EN 301 489-17: V3.2.4 (2020-09)
EN 50130-4: 2011+A1: (2014)
Security Warehouse is a leading distributor in the electronic security equipment industry which provides effective integration support across the African continent.
TRADE
PROJECTS
TRAINING
K90 Centre, Boksburg, North Rand & Rondebult Road, Jansen Park, Boksburg, 1459, South Africa
25 St Dominic Road, Hurlyvale, Johannesburg, 1610, Gauteng, South Africa
123 Malibongwe Drive, Strijdom Park, Randburg, Johannesburg, 1609, Gauteng, South Africa
185 Ontdekker Road,
Roodepoort, Johannesburg,
1724, Gauteng, South Africa
Copyright © 2021 Security & Communication Warehouse, All Rights Reserved | Privacy Policy | Terms & Conditions
Complete the form below and one of our representatives will email you the latest retail price list.
